Lubricants for Mining Equipment | Chevron Lubricants (US)

Heavy Duty Motor Oils

Chevron Delo® 400 SDE SAE 15W-40

A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.

Chevron Delo® 400 XLE SAE 10W-30 (Synthetic Blend)

A premium synthetic technology mixed-fleet oil formulated for fuel economy in newer engines.

Chevron Delo® 400 XLE SAE 15W-40 (Synthetic Technology)

A premium synthetic technology , long drain mixed-fleet engine oil for on- and off-highway applications.

Chevron Delo® 400

SAE 10W, 20, 30, 40, 50

Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.

Chevron Delo® 400 XSP SAE 5W-40

SAE 5W-40

A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.

Ursa® Super Plus EC

SAE 10W-30, 15W-40

A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.

Transmissions Fluids

Chevron Delo® Syn ATF HD

Delo® Syn ATF HD ISOCLEAN® Certified Lubricant is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.

Chevron Delo® Syn-Trans HD

SAE 50

A heavy-duty manual transmission fluid for all-weather, year-round protection and performance.

Chevron Delo® Syn-Trans XE

SAE 75W-90

Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilized by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.

Chevron Delo® Syn-Trans XE SAE 75W-90

A heavy duty synthetic manual transmission fluid for severe service operations.

Chevron Delo® Syn-AMT XDT

SAE 75W-90

Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.

Chevron ATF HD 389

Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF. It is also suitable for use in most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes which need a high-performance, multi-purpose, power transmission fluid

Chevron Delo® TorqForce FD

SAE 60

Delo® TorqForce® FD SAE 60 is a premium heavy-duty gear lubricant specifically designed for use in final drives and axles of modern Caterpillar off-road equipment operating in severe service, where fluids meeting the Cat FD-1 specification are recommended.

Chevron Delo® TorqForce MP

A multipurpose lubricant designed for use in transmissions, wet brakes, and hydraulic systems.

Chevron Delo® TorqForce Syn

5W-30

Delo® TorqForce Syn SAE 5W-30 ISOCLEAN® Certified Lubricant is a high performance fully synthetic lubricant designed for use in transmissions and hydraulic systems.

Delo Coolants

Chevron Delo® ELC Antifreeze/Coolant

A versatile engine coolant suitable for a wide range of on- and off-road applications.

Chevron Delo® ELC PG Antifreeze/Coolant

An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment.

Chevron Delo® XLC Antifreeze/Coolant

An extended-life anti-freeze that provides protection in all the elements.

Chevron Delo® FleetFix CME

A conversion, maintenance or extender fluid for use with Delo ELC Antifreeze/Coolant.

Chevron Delo® FleetFix® CMX

Delo® FleetFix® CMX has been formulated to provide an easy conversion, maintenance and extender formula in one package to help customers either convert to or maintain Delo XLC performance levels in their coolant systems for diesel engines.

Greases

Black Pearl® Grease HM 1

Formerly Delo Extreme Grease EP-1

Black Pearl® Grease HM 1 is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.

Starplex® HD 1, 2 Greases

Formerly Delo® Grease ESI HD EP

Starplex® HD 1, 2 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide.

Starplex® HD 1, 2 Greases

Formerly Delo® Grease ESI HD EP

Starplex® HD 1, 2 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide.

Starplex® HD 1, 2 M3 Greases

Formerly Delo® Grease ESI HD Moly 3% EP

Starplex® HD 1, 2 M3 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.

Starplex® HD 1, 2 M5 Greases

Formerly Delo® Grease ESI HD Moly 5% EP

Starplex® HD 1, 2 M5 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.

Starplex® EP 0, 00, 1, 2 Greases

Formerly Delo® Starplex

Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.

Starplex® Syn Grease EP 1 M5

Formerly Delo® Syn-Grease SXD 220 Moly 5% EP

Starplex® Syn Grease EP 1 M5 is a comprehensive line of greases that are available with or without molybdenum disulfide.

Multifak® EP 00, 0, 1, 2 Greases

Formerly Multifak® EP

Multipurpose extreme pressure greases for use in a variety of industrial applications.

Texclad® 2

Texclad® 2 is a calcium-based grease that resists washout and provides good film strength and load carrying capabilities.

Starplex® Syn Grease XD 1.5

Formerly Ulti-Plex® HV Synthetic Grease EP

Starplex® Syn Grease XD 1.5 is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperature conditions and for those difficult applications requiring extended lubrication intervals.

Multifak® CG Grease

Formerly Chevron Coupling Grease

Multifak® CG Grease is specifically designed for the lubrication of high-speed grease lubricated flexible couplings where high centrifugal forces are present.

Chevron Open Gear Grease

Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.

Starplex® Syn Grease HD 1.5

Formerly Ulti-Plex® Synthetic Grease EP

Starplex® Syn HD 1.5 is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperatures.

Gear Oils

Chevron Delo® Gear EP-5

SAE 80W-90, 85W-140

Delo Gear EP-5 gear lubricants are recommended for use in spiral bevel and hypoid differentials, power dividers, and oil-lubricated steering axle wheel bearings.

Chevron Delo® Gear ESI SAE 80W-90

SAE 80W-90

Premium grade gear lubricant for severe temperature and load conditions.

Chevron Delo® Gear ESI SAE 85W-140

SAE 85W-140

Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.

Chevron Delo® Syn-Gear HD

SAE 75W-90

Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.

Chevron Delo® Syn-Gear XDM SAE 75W-90

A premium heavy-duty, extreme pressure gear lubricant for critical components.

Chevron Delo® Syn-Gear XDM SAE 80W-140

SAE 80W-140

A premium heavy-duty, extreme pressure gear lubricant for critical components.

Meropa®

ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500

Premium quality extreme pressure gear oils that perform under demanding conditions.

Meropa® Synthetic WM

ISO 320

Formulated for heavy-load enclosed gear drives in industrial applications and wind turbines.

Meropa® XL

ISO 68, 150, 220, 320, 460, 680

High performance gear oils for industrial and marine applications.

Hydraulic Oils

Clarity® Hydraulic Oil AW

ISO 32, 46, 68, 100

Designed with ashless technology with an excellent oxidation protection in high-performance industrial applications, as well as in environmentally sensitive areas.

Clarity® Synthetic EA Hydraulic Oil

ISO 46, 68, 100

Readily biodegradable high performance hydraulic oils that deliver maximum protection while meeting EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.

Clarity® Synthetic Hydraulic Oil AW

ISO 32, 46, 68

Ashless Synthetic hydraulic oils for industrial applications in environmentally sensitive areas. These are high viscosity index fluids that provide a wide operating temperature range.

Chevron Hydraulic Oil AW

ISO 32, 46, 68

Hydraulic oils designed for excellent hydraulic pump protection.

Rando® HD

ISO 10, 22, 32, 46, 68, 100, 150, 220, 320

Formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and stationary systems for wide operating conditions.

Rando® HDZ

ISO 15, 22, 32, 46, 68, 100

High Viscosity Index and wide operating temperature lubricant for hydraulic pumps and circulating oil systems.

Ursa® Hydraulic Oil

SAE 10W

Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.

Machine Oils

Way Oils Vistac®

68, 220

Way Oils Vistac® are designed for use in the lubrication of slides and ways of machine tools.

RYKON® EP 2 Grease

Rykon EP is part of Chevron's line of overbased calcium sulfonate complex greases. Rykon EP is a multipurpose product which works in many applications and provides good protection from wear, shock loading, and corrosion.

RYKON® HD 2 Grease

Rykon HD is part of Chevron's line of overbased calcium sulfonate complex greases. It is used in demanding applications in wet environments.

RYKON® HD 2 M5 Grease

Rykon HD M5 features a boost of 5% moly product to meet the demands of OEMs of off-road applications. They feature great shock loading and provide anti-weld protection.

Sil-X 1 Grease

Sil-X® Grease is a silica-thickened grease recommended for industrial applications subjected to very high temperatures requiring a lubricant which will not melt.

Starplex EP 1, 2 M3 Grease

A comprehensive line of greases that are available with molybdenum disulfide. These greases are technically advanced, extreme pressure greases for a wide variety of on-road applications.