Engine oils
Industrial oils
Hydraulic oils
Coolants & antifreezes
Greases
Transmission Gear oils
Available with
High-quality lubricants certified to meet OEM cleanliness requirements.
Oil & gas equipment
CETUS® HIPERSYN®
ISO 32,46, 68, 100, 150, 220, 320, 460
Synthetic compressor oils for long-term performance under high temperatures.
Cetus® PAO
ISO 32, 46, 68, 100, 150
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Hydraulic oils for industrial applications in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Biodegradable hydraulic oils that meet EPA standards for environmentally acceptable marine lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Synthetic hydraulic oils for industrial applications in environmentally sensitive areas.
Delo® 400 XLE SAE 15W-40
A premium synthetic blend, long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® Gear EP-5
SAE 80W-90, 85W-140
Delo Gear EP-5 gear lubricants are recommended for use in spiral bevel and hypoid differentials, power dividers, and oil-lubricated steering axle wheel bearings.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Delo® TorqForce MP
A multipurpose lubricant designed for use in transmissions, wet brakes, and hydraulic systems.
Delo®TorqForce Syn
5W-20
Delo® TorqForce Syn SAE 5W-20 ISOCLEAN® Certified Lubricant is a high performance fully synthetic lubricant designed for use in transmissions and hydraulic systems.
GST Premium XL
32, 46
GST Premium XL products are designed to minimize varnish deposits, resist oxidation, and meet the critical demands of today's gas and steam turbines.
GST® 2300
ISO 32, 46
Specially formulated for the demands of large, heavy duty  gas and steam turbines.
GST® Oil
ISO 32, 46, 68, 100
A turbine oil designed to withstand demanding operating conditions.
GST® Premium
ISO 32
A premium oil specially formulated for MHPS turbines.
HDAX 5200 EF
SAE 40
HDAX® 5200 EF is a premium quality, dispersant/ detergent engine oil.
HDAX® 5200 Low Ash Gas Engine Oils
15W-40, 30, 40
Chevron Supreme ISOCLEAN® Certified Lubricant SAE 10W-30 is a premium automotive motor oil that protects against deposit and sludge formation and provides excellent wear protection to critical engine parts.
Meropa®
ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500
Premium quality extreme pressure gear oils that perform under demanding conditions. 
Meropa® Synthetic EP
ISO 150, 220, 320, 460, 680, 
High quality  EP gear lubricants well suited for most types of industrial gearboxes.
Meropa® XL
ISO 68, 150, 220, 320, 460, 680
High performance gear oils for industrial and marine applications.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
Versatile lubricants for hydraulic pumps and circulating oil systems.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
Versatile lubricants for hydraulic pumps and circulating oil systems.
Regal® R&O
ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
Designed to deliver outstanding performance in steam and hydroelectric turbines.
Clarity® Synthetic Machine Oil
ISO grade 150, 220, 320, 460
Clarity® Synthetic Machine Oils are designed for use as EP gear oils and as paper machine oils.
Rando® WM
ISO 32
Rando® WM 32 ISOCLEAN® Certified Lubricant is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications. Rando WM 32 offers high level protection and performance under severe operating conditions
Cetus® DE
ISO 32, 68, 100, 150
High-quality oils for a variety of portable and stationary compressors.
Cetus® EliteSyn NG
68, 100, 150
Cetus EliteSyn NG is a PAG (polyalkylene glycol) based natural gas compressor oil formulated for use in rotary screw and reciprocating compressors.
Cetus® PAO HC
ISO 220
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF. It is also suitable for use in most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes which need a high-performance, multi-purpose, power transmission fluid
Chevron Cylinder Oil W
ISO 220, 460, 680
Chevron Cylinder Oils W are recommended for lubrication of compressor cylinders and sliding worm gear surfaces in worm drive gear cases.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Chevron Open Gear Lubricant
100 NC, 250 NC, 800 NC
Chevron Open Gear Lubricants are formulated to minimize wear and provide shock load protection during typical operations.
Chevron SRI Grease
NLGI grade: 2
A high-temperature ball and roller bearing grease.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Delo Extreme Grease EP
NLGI grade: 1
Delo® Extreme Grease EP is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Delo® ELI Corrosion Inhibitor
A water-based, super concentrate inhibitor that protects cooling system metals
Delo® FleetFix CME
A conversion, maintenance or extender fluid for use with Delo ELC Antifreeze/Coolant.
Delo® FleetFix® CMX
Delo® FleetFix® CMX has been formulated to provide an easy conversion, maintenance and extender formula in one package to help customers either convert to or maintain Delo XLC performance levels in their coolant systems for diesel engines.
Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilized by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.
HDAX® 3100 Ashless Gas Engine Oils
15W-40, 40
HDAX® 3100 Ashless Gas Engine Oils are high performance, bright stock free, ashless, dispersant type natural gas engine oils.
HDAX® 3200 Low Ash Gas Engine Oils
SAE 30W, 40
A low ash, dispersant/detergent type oil for natural gas applications. 
HDAX® 5100 Ashless Gas Engine Oil
SAE 15W-40, 30, 40
Premium quality ashless oils for natural gas industrial engines.
HDAX® 6500 LFG Gas Engine Oil
SAE 40
A low ash oil for landfill and bio gas powered industrial engines.
HDAX® 9200 Low Ash Gas Engine Oil
SAE 40
A low ash, dispersant/detergent type oil for natural gas applications. 
HDAX® PF Antifreeze/Coolant – Premixed 50/50
50/50
HDAX® PF Antifreeze/Coolant - Premixed 50/50 is a single-phase, ethylene glycol based, low silicate coolant/antifreeze designed for use in natural gas engines and in heavy duty on-highway and off-highway diesel engines.
Meropa® Synthetic WM
ISO 320
Formulated for  heavy-load enclosed gear drives in industrial applications and wind turbines.
Multifak® EP
NLGI grade: 000, 00, 0, 1, 2
Multipurpose extreme pressure greases for use in a variety of industrial applications.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multiviscosity lubricant designed to give robust protection to hydraulic pumps.
Texclad® 2
Texclad® 2 is a calcium-based grease that resists washout and provides good film strength and load carrying capabilities.
Ulti-Plex® Grease EP
NLGI grade: 1, 2
Ulti-Plex® Greases EP are high performance greases specially formulated for extreme pressure bearing applications operating under high and low temperature conditions.
Ulti-Plex® Synthetic Grease EP
NLGI grade: 1.5
Ulti-Plex® Synthetic Grease EP is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperatures.
Ursa® Super Plus EC
SAE 10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.
Chevron Compressor Oil
ISO 260
Chevron Compressor Oil 260 is used to lubricate compressors in hydrocarbon service.
Chevron Coupling Grease
NLGI grade: 0/1
Chevron Coupling Grease is specifically designed for the lubrication of high-speed grease lubricated flexible couplings where high centrifugal forces are present.
Chevron HTF E-100
Chevron HTF E-100 is an exceptional quality single phase, silicate free ethylene glycol concentrate used in heat transfer applications or as an industrial coolant/ antifreeze product.
Chevron HTF P-150
Chevron HTF P-150 is a superior quality single phase, silicate free, propylene glycol concentrate used in heat transfer applications or as an industrial coolant/ antifreeze product.
Chevron HTF P-200
Chevron HTF P-200 is a single phase, silicate free, propylene glycol (USP) based heat transfer fluid concentrate.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Delo® XLI Corrosion Inhibitor Concentrate
Delo® XLI Corrosion Inhibitor - Concentrate is a water based, low toxicity, environmentally friendly, nitrite free carboxylate inhibitor.
HDAX® 5300 Medium Ash Gas Engine Oil
40
HDAX® 5300 Medium Ash Gas Engine Oil is an advanced performance, premium quality, medium ash, dispersant/detergent type gas engine oil formulated especially for four-stroke engines where medium ash oils are preferred.
Ulti-Plex® HV Synthetic Grease EP
NLGI grade: 1.5
Ulti-Plex® HV Synthetic Grease EP is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperature conditions and for those difficult applications requiring extended lubrication intervals.
Think filters on their own - or simply following a preventive maintenance schedule - will keep your oil clean? There's more to oil cleanliness than meets the eye.
The ultimate guide to oil contamination

Learn a better way to reduce oil contamination that can improve your component llife and profitability.

Inside out protection Drilling rigs

 

 

 

Cetus EliteSyn NG Compressor Oil Protects Against Corrosion

Oil life maximized, metal corrosion and oil loss minimized in LeROI® HG12000 non-geared, single stage, oil-flooded rotary screw compressor.
 

Discover how ISOCLEAN Certified® Lubricants can help you meet or exceed the most stringent OEM specifications.
Restoring full productivity

 

"The Chevron team discovered the cause of the emulsions and provided a cost effective solution. ”
 

 

 

TRUST
What really breaks down when there's contamination?
Find my ISOCLEAN Certified Lubricants Sales Representative in