Engine oils
Industrial oils
Hydraulic oils
Coolants & antifreezes
Greases
Transmission Gear oils
Available with
High-quality lubricants certified to meet OEM cleanliness requirements.
Waste hauling

Heavy Duty Motor Oils

Delo® 400 SDE SAE 10W-30
An Synthetic Blend API CK-4 heavy duty engine oil specifically formulated for 2017 greenhouse gas (GHG 17) compliant diesel engines designed for lower emissions and improved fuel economy. Fully compatible with previous engines and oil categories.
Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas (GHG 17) engines.
Delo® 400 SNG
15W-40
Delo® 400 SNG SAE 15W-40 with ISOSYN® Advanced Technology is a premium CNG/LNG oil
Delo® 400 XLE SAE 10W-30 (Synthetic Technology)
A premium synthetic technology mixed-fleet oil formulated for fuel economy in newer engines. 
Delo® 400 XLE SAE 15W-40 (Synthetic Technology)
A premium synthetic technology , long drain  mixed-fleet engine oil for on- and off-highway applications.
Delo® 400 XSP SAE 5W-40
SAE 5W-40
A mixed-fleet, heavy duty engine oil for a variety of on- and off-highway applications.
Delo® 400 XSP SAE 5W-30
A heavy duty engine oil specifically formulated for on-highway applications.
Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Ursa® Super Plus EC
SAE 10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.

Delo Transmission Fluids

Delo® Syn ATF HD
Delo® Syn ATF HD ISOCLEAN® Certified Lubricant is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.
Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilized by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.
Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF. It is also suitable for use in most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes which need a high-performance, multi-purpose, power transmission fluid

Delo Coolants

Delo® ELC Advanced Antifreeze/Coolant 50/50
Delo ELC Advanced products are the next generation, ethylene glycol-based NOAT (Nitrited Organic Additive Technology) products to provide excellent extended life coolant system protection in diesel, natural gas and CNG engines for both on- and off-road applications. It is available in Premixed 50/50 and concentrate.
Delo® ELC Antifreeze/Coolant
A versatile engine coolant suitable for a wide range of  on- and off-road applications.
Delo® ELC PG Antifreeze/Coolant
An all-purpose, long-life engine coolant for mixed truck fleets, off-highway and stationary equipment. 
Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 
Delo® FleetFix CME
A conversion, maintenance or extender fluid for use with Delo ELC Antifreeze/Coolant.
Delo® FleetFix® CMX
Delo® FleetFix® CMX has been formulated to provide an easy conversion, maintenance and extender formula in one package to help customers either convert to or maintain Delo XLC performance levels in their coolant systems for diesel engines.

Delo Greases

Delo® Grease EP
NLGI grade: 00, 0, 1, 2
A family of advanced greases to help keep equipment running smoothly, on- or off-road.
Delo® Grease ESI HD EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide.
Delo® Grease ESI HD
NLGI grade: 1, 2
A full line of heavy duty greases for high-stress, high-load and high temperature conditions. 
Delo® Grease ESI HD Moly 3% EP
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Delo® Grease ESI HD Moly 5% EP  
NLGI grade: 1, 2
Delo® Grease ESI® HD EP is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Delo® Starplex
NLGI grade: 1, 2
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Delo® Grease ESI EP
NLGI grade: 2
A technically advanced, extreme pressure wheel bearing, chassis and kingpin grease.

Gear Oils

Delo® Gear EP-5
SAE 80W-90, 85W-140
Delo Gear EP-5 gear lubricants are recommended for use in spiral bevel and hypoid differentials, power dividers, and oil-lubricated steering axle wheel bearings.
Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Delo® Syn-Gear XDA
75W-85
Delo® Syn-Gear XDA is a premium heavy duty, extreme pressure, multigrade automotive gear lubricant formulated for new generation Daimler axles found on newer model Freightliner and Western Star Trucks.
Chevron Gear Oil GL-1
90, 140
Chevron Gear Oil GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).
Chevron Open Gear Lubricant
100 NC, 250 NC, 800 NC
Chevron Open Gear Lubricants are formulated to minimize wear and provide shock load protection during typical operations.

Hydraulic Oils

Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Designed with ashless technology with an excellent oxidation protection in high-performance industrial applications, as well as in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Readily biodegradable high performance hydraulic oils that deliver maximum protection while meeting EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Ashless Synthetic hydraulic oils for industrial applications in environmentally sensitive areas. These are high viscosity index fluids that provide a wide operating temperature range.
Ursa® Hydraulic Oil
SAE 10W
Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
Formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and stationary systems for wide operating conditions.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps in Extreme Climates.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
High Viscosity Index and wide operating temperature lubricant for hydraulic pumps and circulating oil systems.
Rando® WM 32
ISO 32
Rando® WM 32 is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications. Rando WM 32 offers high level protection and performance under severe operating conditions

Chevron Greases

Chevron Moly Grease EP
NLGI grade: 1, 2
Chevron Moly Greases EP are molybdenum disulfide extreme pressure (EP) greases designed for automotive and industrial applications.
Chevron Ultra-Duty Grease EP
NLGI grade: 0, 1, 2
Versatile high pressure greases for a variety of automotive and industrial applications.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.

Chevron Gear Oils

Chevron Gear Oil GL-1
90, 140
Chevron Gear Oil GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).
Chevron Open Gear Lubricant
100 NC, 250 NC, 800 NC
Chevron Open Gear Lubricants are formulated to minimize wear and provide shock load protection during typical operations.

Ancillary Products

Texclad® 2
Texclad® 2 is a calcium-based grease that resists washout and provides good film strength and load carrying capabilities.