OMINIMAX™ Technology - SynBlend
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Improve Engine and After
Treatment System Life:
Extend DPF Cleaning 2.5X
Extended Drain Potential
1.7X*
Improvement Potential
3% ** 4.2%**
15W-40 CK-4 10W-30 CK-4
Conventional:
Diesel
Lower Carbon:
Renewable Diesel
Natural Gas
Renewable Natural Gas
APPROVED FOR USE IN MIXED DIESEL AND CNG ENGINE FLEETS
ISOSYN Advanced Technology™ - Synthetic
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Maximum Engine Life:
Improve valve train and
piston ring wear protection
Extended Drain Potential
2X*
Improvement Potential
1.6%** 2.3%**
5W-30 CK-4 5W-30 FA-4
Conventional:
Diesel
Gasoline
Low Carbon:
Renewable Diesel
ISOSYN Advanced Technology™ - SynBlend
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Improve Engine Cleanliness:
Increase scuffing resistance
and protection against light
duty power cylinder failure
by reducing LSPI
Extended Drain Potential
1.5X*
Improvement Potential
1.2%** 2%**
10W-30 CK-4 10W-30 FA-4
Conventional:
Diesel
Gasoline
Low Carbon:
Renewable Diesel
ISOSYN Advanced Technology™
Component Life
Oil Drain Intervals
Fuel Economy
Fuel Type
Increase Engine and
Service Life:
Exceptional engine wear and rating for sludge and deposit control
Extended Drain Potential
1.25X*
Low Carbon
Natural Gas
Renewable Natural Gas
*Extended oil drain interval (ODI) potential is based on the average of US Class 8 engine manufacturers’ recommendations. Results will vary depending upon vehicle/equipment type, fuel consumption, maintenance practices, temperature, and variable driving/operating conditions. Consult the engine/vehicle OEM and Chevron before implementing extended ODIs, especially if the engine/vehicle is under warranty.
**Improvement vs. SAE 15W-40 oil in class 8 diesel engine bench testing. Actual savings will vary depending upon vehicle/equipment type, load, temperature, and variable driving/operating conditions.