Surging pressures in pumps and valves can increase metal-to-metal contact and lead to accelerated wear unless they are protected by clean, high quality antiwear hydraulic oils. As hydraulic pressures increase over 1000 psi, the need for antiwear protection increases proportionally.

Chevron is continually advancing the state of lubricant technology. For detailed information on our most popular products, view detailed product data sheets from the categories below.

Chevron 1000 THF

A high quality, multifunctional tractor hydraulic fluid formulated for use in transmissions, final drives, wet brakes and hydraulic systems of tractors and other equipment employing a common fluid reservoir. Chevron 1000 THF is designed for many uses to meet the needs of modern tractors and mobile hydraulic systems. It serves as a hydraulic fluid in the operation of power steering units, brakes, implements and attachments. The special additives in Chevron 1000 THF protect metal surfaces against wear and minimize downtown with good seal compatibil

Clarity® Synthetic EA Hydraulic Oils  NEW!

High performing, readily biodegradable synthetic hydraulic oils available in 46, 68 and 100 ISO grades. They are designed to give maximum protection in hydraulic equipment used in vessels and in both mobile and stationary hydraulic pumps in high performing industrial applications. The ISO 68 and 100 grades are recommended for use in stern tubes. These products are self-certified as an Environmentally Acceptable Lubricant (EAL) meeting the requirements of the 2013 U.S. EPA Vessel General Permit (VGP). They meet or exceed the requirements and performance levels of most of the major hydraulic pump and stern tube OEMs.

Rando® HD

Provides excellent antiwear protection, oxidation and corrosion inhibition, foam and aeration suppression. Rando HD ISO 10 and 22 can be used as spindle lubricants where zinc-free oils are not a requirement. Rando HD ISO 32, 46, and 68 are designed for vane-, piston-, or gear-type pumps, and lightly loaded reciprocating compressors. Rando HD ISO 100, 150, and 200 are recommended for applications where AGMA rust and oxidation inhibited oils are required.

Rando HDZ

Designed to give robust protection to hydraulic pumps, and recommended for hydraulic or circulating oil systems, including marine on-deck machinery, hydraulic actuated loading bins, or equipment that require a wider operating temperature as compared to a single viscosity grade oil.

Rando HD Premium Oil MV

A versatile, multiviscosity lubricant designed to give robust protection to hydraulic pumps. The multiviscosity feature allows even and continuous power transmission over a wide temperature range with a minimum of shudder.

Clarity® Hydraulic Oils AW

Ashless hydraulic oil for high performance industrial applications utilizing axial piston pumps where pressures may exceed 5000 psi, and vane- and gear-type pumps, and where applications are situated in environmentally sensitive areas.

Clarity Synthetic Hydraulic Oil AW

Designed to give maximum protection in both mobile and stationary hydraulic equipment in industrial applications as well as in environmentally sensitive areas. Its low temperature fluidity helps enable operations as low as -30°C (-22°F).

Hydraulic Oils AW

Intended to provide a cost-effective alternative in hydraulic ram and hydraulic motor applications operating in light to moderate service conditions.

Ursa® Hydraulic Oil 10W

A premium hydraulic oil specifically designed to give maximum pump protection in on-and off-highway heavy duty hydraulic applications.

For information about other products that may be available for your industry, in your region, please contact us.

  • Printable Version