Chevron is continually advancing the state of lubricant technology. Following are just some of our most popular gear lubricants.

GST Premium 32

Formulated to meet critical demands of non-geared gas, steam and hydroelectric turbine bearing lubrication and R&O service in marine reduction gears. GST Premium 32 turbine oil is approved for Mitsubishi Heavy Industries MS04-MA-CL002 and has exceptional oxidation and thermal stability for long service life, outstanding rust and corrosion protection, high viscosity index for minimal viscosity change in varying temperatures, minimum foaming and rapid water separation.

Clarity® Synthetic EA Gear Oil  NEW!

High performing, readily biodegradable synthetic gear oil for use in industrial and marine applications. These products are available in an ISO 100 and ISO 150 viscosity grades, and have high anti-wear and EP properties, excellent corrosion and rust protection and outstanding system cleanliness characteristics. These products are self-certified as an Environmentally Acceptable Lubricant (EAL) meeting the requirements of the 2013 U.S. EPA Vessel General Permit (VGP). They meet or exceed the requirements and performance levels of many of the major OEMs.

Tegra® Synthetic Gear Lubricants

Recommended for all types of enclosed industrial gearboxes, especially those running continuously at temperatures up to 107°C (225°F) or exposed to very cold temperatures as low as -46°C(-50°F), or under severe service conditions, such as heavy loads or low speeds.

HiPerSYN® Oils

Provide outstanding thermal and oxidation stability for industrial bearings and gears that require an R&O-type synthetic gear oil. .

Delo® Synthetic Gear Lubricant

Designed to offer outstanding thermal and oxidation stability and to meet all OEM warranty requirements. A fully synthetic lubricant, it offers excellent lubrication in both extremely hot and extremely cold environments. It is recommended for use in rear axles and differentials operating under extreme conditions.

Delo Gear Lubricant ESI®

Premium grade, multipurpose gear lubricants that are ideally suited for gear sets exposed to extremely high temperatures and loads. Their exceptional thermal and oxidation stability and antiwear performance permit longer gear life and optimal drain intervals.

Meropa® Lubricants

Premium quality extreme pressure gear oils with excellent load carrying capacity, water demulsibility, oxidation stability, and corrosion protection for industrial enclosed gearing where an AGMA extreme pressure lubricant is specified.

Open Gear Grease

For many open gears in industrial, mining, construction, and marine equipment. Open Gear Grease can also be used for chain and sprocket lubrication, or as a tenacious fifth wheel lubricant. .

Open Gear Lubricants NC

For open gears, wire ropes, cables; girth and pinion gears on rod and ball mills, rack and pinion gears on shovel dipsticks.

Pinnacle® WM 320

A high-quality, high-performance, fully synthetic gearbox lubricant, specially developed to withstand the shock loads and extreme environmental temperature variations experienced by wind turbines.

Cylinder Oils W

Recommended for lubrication of compressor cylinders and sliding worm gear surfaces in worm drive gear cases.

RPM® Arctic Gear Lubricant

Designed to provide excellent wear protection for automotive gear sets operating in extremely cold conditions, where fluidity of the lubricant is critical to protect gears and bearings. .

RPM Gear Oils

Recommended for many automotive or industrial equipment where the equipment suppliers recommend the use of a straight mineral oil. .

RPM Synthetic Gear Lubricant

Recommended as a rear axle and differential lubricant in over-the-road and off-road vehicles when operating under severe conditions and in extremely cold or hot environments.

RPM Universal Gear Lubricants

Multipurpose lubricants recommended for use in spiral bevel and hypoid differentials, power dividers, and oil-lubricated steering axle wheel bearings.

Ultra Gear Lubricants

Premium grade, multipurpose gear lubricants that provide outstanding oxidation, corrosion, and rust protection for gear sets exposed to extremely high loads, with requirements for longer drain intervals.

For information about other products that may be available for your industry, in your region, please contact us.

  • Printable Version
EAL Announcements

Our Clarity® Synthetic EA Hydraulic Oils are self-certified as EAL to help meet the needs of our customers.

Learn More ยป

1st Source Chevron Lubrication Marketer

Chevron 1st Source Marketers are more than a supplier – their priority is your bottom line. Use our Marketer Locator to find a 1st Source Marketer now.

Delo Gear Lubricants