Chevron Lubricants

Power Generation

Powerline-Workers-in-Bucket-Truck-290x105
Heavy-Duty Motor Oils

Delo 400 LE Synthetic 5W-40

Delo® 400 LE Synthetic SAE 5W-40 is a mixed-fleet motor oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines in which the API CJ-4 or API SN service categories and SAE 5W-40 viscosity grades are recommended.

Product available through April 2017.

Coolants/Antifreezes

Delo ELC Antifreeze/Coolant

Delo® ELC Antifreeze/Coolant products are single phase, ethylene glycol based products available in various dilutions that are based on patented aliphatic carboxylate corrosion inhibitor technology specifically formulated for heavy duty cooling system applications that require nitrite.

Chevron Product Code: 227811 

Delo XLC Antifreeze/Coolant

Delo® XLC is a non-nitrited extended life Antifreeze/Coolant formulation for heavy and light duty vehicles and equipment. Delo XLC is formulated with an aliphatic carboxylate corrosion inhibitor system available as a concentrate and a premix 50/50.

Greases

Ulti-Plex Greases EP

Ulti-Plex® Greases EP are high performance greases specially formulated for extreme pressure bearing applications operating under high and low temperature conditions.

Available in NLGI grades 1, 2

Ulti-Plex Synthetic Grease EP

Ulti-Plex® Synthetic Grease EP is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperatures.

Chevron SRI Grease NLGI 2

Chevron SRI Grease 2 is a high temperature ball and roller bearing grease.

Gear Lubricants

Meropa

Meropa® gear lubricants are premium quality extreme pressure gear oils with excellent load carrying capacity, water demulsibility, oxidation stability, and corrosion protection. Available in ISO grades 68, 100, 150, 220, 320, 460, 680, 1000, 1500

Meropa Synthetic EP

Meropa® Synthetic EP oils are high quality industrial EP gear lubricants.
Available in ISO grades 150, 220, 320, 460, 680

Meropa Ultra Gear Lubricant

Meropa Ultra Gear Lubricants are premium industrial gear lubricants designed for many types of industrial bearings and gears where loads and shock loadings are high.
Available in ISO grades 68, 150, 220, 320, 460, 680

Chevron Gear Oil GL-1

Chevron Gear Oils GL-1 are rust and oxidation inhibited gear oils that are recommended for many automotive and industrial equipment where the equipment suppliers recommend the use of a straight mineral oil in SAE viscosity grades 90 (ISO 220) or 140 (ISO 460).

Natural Gas Engine Oils

HDAX 5200 Low Ash Gas Engine Oil

HDAX® 5200 Low Ash Gas Engine Oils are advanced performance, premium quality, bright stock free, low ash, dispersant/detergent type engine oils.
Available in SAE 15W-40, 30, 40

Compressor Oils

Cetus DE

Cetus® DE oils are used for portable and stationary rotary screw, rotary vane, and reciprocating compressors.
Available in ISO grades 32, 68, 100, 150

Cetus HiPerSYN Oils

Cetus® HiPerSYN® Oils are synthetic compressor oils. Cetus HiPerSYN Oils are recommended for air compressors; especially portable and stationary rotary, vane, and screw compressors.
Available in ISO grades 32, 46, 68, 100, 150, 220, 320, 460

Chevron Cylinder Oil W

Recommended for lubrication of compressor cylinders and sliding worm gear surfaces in worm drive gear cases for excellent metal wettability, delivering a protective oil film for maximum protection.
Available in ISO grades 220, 460, 680

Turbine Oils

GST 2300

GST® 2300 oils are formulated with premium base oil technology and are highly recommended for use in gas and steam turbines with and without loaded gearboxes. GST 2300 oils are designed to meet the critical lubrication demands of:

  • combined cycle turbines 
  • large heavy duty industrial gas turbines 
  • gas and steam turbines

They are an excellent recommendation for many other industrial applications including air compression and where R&O type oils are recommended.
Available in ISO 32, 46

GST Oil

GST® Oils are formulated with premium base oil technology designed to meet the critical demands of:

  • non-geared gas, steam, and hydroelectric turbine bearing lubrication
  • reduction gear lubrication in marine operations

They are an excellent recommendation for many other industrial applications including air compression where R&O type oils are recommended.
Available in ISO 32, 46, 68, 100

GST Premium 32

GST® Premium 32 is formulated with premium base oil technology designed to meet the critical demands of MHPS (Mitsubishi Hitachi Power Systems), formerly MHI (Mitsubishi Heavy Industries), non-geared gas and steam turbines requiring a MS04-MA-CL002 product.

Regal SGT

Regal® SGT 22 is designed for use in modified aviation-type gas turbines in non-aviation stationary applications such as in industrial power generation and in marine service.

Regal R&O

Regal® R&O oils are turbine oils designed to give outstanding performance in steam and hydroelectric turbines.
Available in grades 22, 32, 46, 68, 100, 115, 150, 220, 320, 460, 680