Engine oils
Industrial oils
Hydraulic oils
Coolants & antifreezes
Greases
Transmission Gear oils
Available with
High-quality lubricants certified to meet OEM cleanliness requirements.
Cement equipment

Delo Heavy Duty Motor Oils

Chevron Delo® 400 SDE SAE 15W-40
A heavy duty oil specifically formulated for 2017 greenhouse gas engines. DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Chevron Delo® 400 XLE 10W-30 SynBlend
SAE 10W-30
A premium synthetic technology mixed-fleet oil formulated for fuel economy in newer engines. 
Chevron Delo® 400 XLE SAE 15W-40 (Synthetic Technology)
A premium synthetic technology , long drain  mixed-fleet engine oil for on- and off-highway applications. DISCONTINUED: USE DELO 400 XLE SB 15W-40 WHEREVER YOU CURRENTLY USE THIS PRODUCT.
Delo® 400 SP 0W-30
Delo® 400 SP SAE 0W-30 (Synthetic) is a mixed fleet engine oil recommended for naturally aspirated and turbocharged four-stroke diesel engines and fourstroke gasoline engines in which an SAE 0W-30 viscosity grade is recommended for cold weather startup and operation.
Chevron Delo® 400 ZFA SAE 10W-30
A premium synthetic blend mixed-fleet oil for new-generation  fuel economy engines.
Chevron Delo® 400
SAE 10W, 20, 30, 40, 50
Delo® 400 monograde oils are mixed-fleet motor oils recommended for older four-stroke gasoline and diesel engines.
Ursa® Super Plus EC
SAE 10W-30, 15W-40
A heavy duty engine oil for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines.

Transmissions Fluids

Chevron Delo® Syn ATF HD
Delo® Syn ATF HD ISOCLEAN® Certified Lubricant is specially engineered for heavy duty automatic truck and bus transmissions operating in extended service. It is officially approved by Voith and ZF for extended drain intervals.
Chevron Delo® Syn-AMT XDT
SAE 75W-90
Delo® Syn-AMT XDT is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Daimler DT-12 Automated Manual Transmissions installed on most Freightliner or Western Star trucks that have DD15 or DD13 diesel engines.
Chevron Delo® Syn-Trans HD
SAE 50
A heavy-duty  manual transmission fluid for all-weather, year-round protection and performance.
Chevron Delo® Syn-Trans XE
SAE 75W-90
Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilized by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.
Chevron Delo® Syn-Trans XV SAE 75W-80
75w-80
A full synthetic fluid for Volvo I-Shift and Mack® mDrive™ automated manual transmissions. 
Chevron Delo® Syn-Trans XE SAE 75W-90
A heavy duty  synthetic manual transmission fluid for severe service operations.
Chevron ATF HD 389
Chevron ATF HD 389 is designed for Allison on-highway, heavy-duty transmissions which require the TES-389 Schedule One ATF. It is also suitable for use in most pre-2006 automatic transmissions built by General Motors, Ford Motor Company and other makes which need a high-performance, multi-purpose, power transmission fluid

Coolants

Chevron Delo® FleetFix CME
A conversion, maintenance or extender fluid for use with Delo ELC Antifreeze/Coolant.
Chevron Delo® FleetFix® CMX
Delo® FleetFix® CMX has been formulated to provide an easy conversion, maintenance and extender formula in one package to help customers either convert to or maintain Delo XLC performance levels in their coolant systems for diesel engines.
Chevron Delo® XLC Antifreeze/Coolant
An extended-life anti-freeze that provides protection in all the elements. 

Greases

Black Pearl® Grease HM 1
Formerly Delo Extreme Grease EP-1
Black Pearl® Grease HM 1 is recommended for use as a general purpose automotive and industrial grease where extreme low temperature performance is required.
Starplex® HD 1, 2 Greases
Formerly Delo® Grease ESI HD EP
Starplex® HD 1, 2 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide.
Starplex® HD 1, 2 Greases
Formerly Delo® Grease ESI HD EP
Starplex® HD 1, 2 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide.
Starplex® HD 1, 2 M3 Greases
Formerly Delo® Grease ESI HD Moly 3% EP
Starplex® HD 1, 2 M3 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Starplex® HD 1, 2 M5 Greases
Formerly Delo® Grease ESI HD Moly 5% EP
Starplex® HD 1, 2 M5 Greases is a comprehensive line of greases that are available with or without molybdenum disulfide. These greases are designed for plain and anti-friction bearing applications operating under high stress/high load conditions, coupled with high ambient temperatures typically found in heavy duty off-road applications.
Starplex® EP 0, 00, 1, 2 Greases
Formerly Delo® Starplex
Heavy duty, water resistant, extreme pressure greases for chassis and wheel bearings.
Starplex® Syn Grease EP 1 M5
Formerly Delo® Syn-Grease SXD 220 Moly 5% EP
Starplex® Syn Grease EP 1 M5 is a comprehensive line of greases that are available with or without molybdenum disulfide.
Black Pearl® Grease SRI 2
Formerly Chevron SRI Grease
A high-temperature ball and roller bearing grease.
Multifak® CG Grease
Formerly Chevron Coupling Grease
Multifak® CG Grease is specifically designed for the lubrication of high-speed grease lubricated flexible couplings where high centrifugal forces are present.
Multifak® EP 00, 0, 1, 2 Greases
Formerly Multifak® EP
Multipurpose extreme pressure greases for use in a variety of industrial applications.
Starplex® Syn Grease XD 1.5
Formerly Ulti-Plex® HV Synthetic Grease EP
Starplex® Syn Grease XD 1.5 is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperature conditions and for those difficult applications requiring extended lubrication intervals.
Starplex® Syn Grease HD 1.5
Formerly Ulti-Plex® Synthetic Grease EP
Starplex® Syn HD 1.5 is a high performance grease specially formulated for extreme pressure bearing applications operating under high and low temperatures.
Texclad® 2
Texclad® 2 is a calcium-based grease that resists washout and provides good film strength and load carrying capabilities.
Chevron Open Gear Grease
Chevron Open Gear Grease is an open gear grease formulated with high viscosity mineral oils in a nonsoap-based thickener typically used in chain and open gear lubricant applications.

Gear Oils

Chevron Delo® Gear EP-5
SAE 80W-90, 85W-140
Delo Gear EP-5 gear lubricants are recommended for use in spiral bevel and hypoid differentials, power dividers, and oil-lubricated steering axle wheel bearings.
Chevron Delo® Gear ESI SAE 80W-90
SAE 80W-90
Premium grade gear lubricant for severe temperature and load conditions. 
Chevron Delo® Gear ESI SAE 85W-140
SAE 85W-140
Premium grade lubricants for gearsets exposed to extremely high temperatures and loads.
Chevron Delo® Syn-Gear HD
SAE 75W-90
Delo Syn-Gear HD gear lubricant is a heavy duty, extreme pressure, multigrade automotive gear lubricant.
Chevron Delo® Syn-Gear XDM SAE 75W-90
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Chevron Delo® Syn-Gear XDM SAE 80W-140
SAE 80W-140
A premium heavy-duty, extreme pressure gear lubricant for critical components.
Meropa®
ISO 68, 100, 150, 220, 320, 460, 680, 1000, 1500
Premium quality extreme pressure gear oils that perform under demanding conditions. 
Meropa EliteSyn™ XM
150, 220, 320, 460, 680
Meropa EliteSyn™ XM oils are premium high-performance synthetic gear oils
Meropa® XL
ISO 68, 150, 220, 320, 460, 680
High performance gear oils for industrial and marine applications.
Chevron Open Gear Lubricant
250 NC
Chevron Open Gear Lubricant is formulated to minimize wear and provide shock load protection during typical operations.

Hydraulic Oils

Clarity® Hydraulic Oil AW
ISO 32, 46, 68, 100
Designed with ashless technology with an excellent oxidation protection in high-performance industrial applications, as well as in environmentally sensitive areas.
Clarity® Synthetic EA Hydraulic Oil
ISO 46, 68, 100
Readily biodegradable high performance hydraulic oils that deliver maximum protection while meeting EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.
Clarity® Synthetic Hydraulic Oil AW
ISO 32, 46, 68
Ashless Synthetic hydraulic oils for industrial applications in environmentally sensitive areas. These are high viscosity index fluids that provide a wide operating temperature range.
Chevron Hydraulic Oil AW
ISO 32, 46, 68
Hydraulic oils  designed for excellent hydraulic pump protection.
Rando® HD
ISO 10, 22, 32, 46, 68, 100, 150, 220, 320
Formulated with premium base oil technology and designed to give robust protection to hydraulic pumps in mobile and stationary systems for wide operating conditions.
Rando® HD Premium Oil MV
ISO 32
Rando® HD Premium Oil MV is a versatile multi-viscosity lubricant designed to give robust protection to hydraulic pumps in Extreme Climates.
Rando® HDZ
ISO 15, 22, 32, 46, 68, 100
High Viscosity Index and wide operating temperature lubricant for hydraulic pumps and circulating oil systems.
Rando® WM 32
ISO 32
Rando® WM 32 is a high performance multigrade hydraulic fluid designed for use in wind turbine systems and a wide range of other applications. Rando WM 32 offers high level protection and performance under severe operating conditions
Ursa® Hydraulic Oil
SAE 10W
Ursa® Hydraulic Oil 10W ISOCLEAN® Certified Lubricant is a heavy duty on and off-highway hydraulic oil that is recommended for SAE 10W applications and for equipment with Caterpillar TO-2 requirements.
Chevron Delo® TorqForce MP
A multipurpose lubricant designed for use in transmissions, wet brakes, and hydraulic systems.
Chevron Delo® TorqForce Syn
5W-30
Delo® TorqForce Syn SAE 5W-30 ISOCLEAN® Certified Lubricant is a high performance fully synthetic lubricant designed for use in transmissions and hydraulic systems.

Compressor Oils

CETUS® HIPERSYN®
ISO 32,46, 68, 100, 150, 220, 320, 460
Synthetic compressor oils for long-term performance under high temperatures.
Cetus® PAO
ISO 32, 46, 68, 100, 150
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Cetus® PAO HC
ISO 220
A synthetic compressor lubricant for optimal efficiency and longer equipment life.
Cetus® DE
ISO 32, 68, 100, 150
High-quality oils for a variety of portable and stationary compressors.

Ancillary Products

Regal® R&O
ISO 22, 32, 46, 68, 100, 150, 220, 320, 460, 680
High quality circulating and turbine oil with diverse compatibility and proven performance
Aries®
32, 46, 100, 150, 220, 320
Aries® lubricants are designed for use in percussion air tools.
RYKON® EP 2 Grease
Rykon EP is part of Chevron's line of overbased calcium sulfonate complex greases. Rykon EP is a multipurpose product which works in many applications and provides good protection from wear, shock loading, and corrosion.
RYKON® HD 2 Grease
Rykon HD is part of Chevron's line of overbased calcium sulfonate complex greases. It is used in demanding applications in wet environments.
Starplex EP 1, 2 M3 Grease
A comprehensive line of greases that are available with molybdenum disulfide. These greases are technically advanced, extreme pressure greases for a wide variety of on-road applications.
TALCOR™ OGP-4 Gear Oil
#000
Talcor™ OGP-4 is an advanced Open Gear Lubricant formulated with solvent free blend of hydro-treated mineral oils and stable synthetic thickeners, new micro ground lubricating solids and plastic-coupling chemical agents for the lubrication of industrial open or enveloped gears.
TALCOR™ OGP-6 Gear Oil
#000
Talcor™ OGP-6 is an adhesive, Open Gear Lubricant free of bitumen, graphite, molybdenum disulphide and other heavy metals. Its highly refined base oils and stable synthetic thickeners, compounded together with high performance enhancing additives, provide a transparent lubricant film on the gear flanks.
ULTRA-DUTY XD 00
Formerly Chevron Ultra-Duty HD 00
Ultra-Duty XD is a lithium based semi-fluid grease recommended for gear drives that specify an NLGI 00 grease.
Oil contamination Oil contamination

Think filters on their own - or simply following a preventive maintenance schedule - will keep your oil clean? There's more to oil cleanliness than meets the eye.

 

Concrete trucks Concrete trucks

Bumper to bumper protection concrete trucks

 

 

 

 

ISOCLEAN ISOCLEAN

 

 

 

Discover how ISOCLEAN Certified® Lubricants can help you meet or exceed the most stringent OEM specifications.

 

 

Trust Trust

What really breaks down when there's contamination?

Find my ISOCLEAN Certified Lubricants Sales Representative in